Welcome To b2b168.com, Join Free | Sign In
中文(简体) |
中文(繁體) |
Francés |Español |Deutsch |Pусский |
| No.9753308

- Product Categories
- Friendly Links
Information Name: | Turbine manufacturers, energy companies towers, energy saving cooling tower |
Published: | 2013-11-11 |
Validity: | 30 |
Specifications: | |
Quantity: | 1.00 |
Price Description: | |
Detailed Product Description: | 2, crossflow towers were installed on both sides of the inlet pipe from the and connect to the distribution tank, the user should take place in a setting valve for regulating the flow. Inlet tube can be introduced by the following dry, you can put on dry pipe on the tower, then its pipeline stand should fall on the side of the cooling tower rack. Optional air outlet direction into either take out the tank from the bottom. 3, safety and should be used to adjust the roundness hairdryer and make the tip clearance with the wall of the tower is equal to not less than 10mm. To adjust to a consistent blade angle. The method of adjusting the blade near the tip of 150mm at the front and rear of each edge of the blade to make a mark, respectively, then the holder blade chord were measured before and after the two edges of each distance, to calculate the points around the edge of each blade of this elevation elevation through several adjustments to make to reach consensus is qualified. 4, should be avoided in a dusty layer, acid gas field institutes use, otherwise it will lead to corrosion of heat exchangers and piping. 5, the cooling tower inlet and the distance between the walls is as follows: a single tower type is 2 meters, the twin towers type is 2.5 m, 3.5 m three-tower type, four towers above should be 5 meters above the height of the wall should be avoided lower than the overall height of the tower. 6, the cooling tower exhaust vent and the distance between the obstacle should be 5 meters. Please login www.dgenzen.com and www.dgjinquan.cn |
Admin>>>
You are the 14567 visitor
Copyright © GuangDong ICP No. 10089450, Okada Electronic Technology Co., Ltd. of Dongguan City All rights reserved.
Technical support: ShenZhen AllWays Technology Development Co., Ltd.
AllSources Network's Disclaimer: The legitimacy of the enterprise information does not undertake any guarantee responsibility
You are the 14567 visitor
Copyright © GuangDong ICP No. 10089450, Okada Electronic Technology Co., Ltd. of Dongguan City All rights reserved.
Technical support: ShenZhen AllWays Technology Development Co., Ltd.
AllSources Network's Disclaimer: The legitimacy of the enterprise information does not undertake any guarantee responsibility